Hose Bib Replacement

removed the screws to a hose bib that would not shut off completely. There was a service loop, so I pulled it out and looked. There was a pinhole leak on the solder joint. The meter was shut off and the old hose bib was cut off. The new hose bib was crimped on and meter was turned back on. The meter cap was replaced. No leaks on the new hose bib. Used 2 3" screws to install and tested to make sure it worked well. No issues. Silicone was added to the hose in the siding and on the backside of the hosebib mounting plate. Turned on the bib and it worked well.